dayvidson

Respostas no Fórum

Visualizando 14 posts - 1 até 14 (de 14 do total)
  • Autor
    Posts
  • em resposta a: Routers CIsco- Funcerti #104415
    dayvidson
    Participante

    Quais modelos são eles? na foto não da para ver e não tem descrição deles… estou querendo montar meu lab.. se for os que desejo compro os 3. no aguardo..

    em resposta a: Routers CIsco- Funcerti #104400
    dayvidson
    Participante

    Estou na espera do link e poder participar do leilão…

    em resposta a: [Dúvida] MPLS-VRF+BGP+OSPF #103320
    dayvidson
    Participante

    @JaymeVerg

    Assim que concluir vou explicar sim blz, até porque vai me ajudar tenho prova da pós sobre o assunto ai já estudo e vejo como estão meus conceitos.

    Quanto aos desafios vou deixara qui anotado as referências mas vou tentar blz.

    em resposta a: [Dúvida] MPLS-VRF+BGP+OSPF #103318
    dayvidson
    Participante

    @Leandro Freitas

    Vou sim, demorei porque estava almoçando hehehe começar agora.

    em resposta a: [Dúvida] MPLS-VRF+BGP+OSPF #103316
    dayvidson
    Participante

    @Leandro Freitas

    não entendi o OSPF já está rodando no backbone MPLS ? ou você está falando das configurações dos DRs e BDRs ?

     

    em resposta a: [Dúvida] MPLS-VRF+BGP+OSPF #103313
    dayvidson
    Participante

    @Leandro Freitas

    Pingou a VPNa (CE11) pingou na VPNa(CE21) tudo blz agora eu fui olhar meu show run da CEs tava com uma rota doida isso só depois do tracert ter se perdido da nerial de entrada para a CEs

    vlw pela ajuda.

    @JaymeBerg

    Vlw pela ajuda, eu estava procurando no site da blindhog mas não encontrei nada, mais valeu vou dar uma estudada no webnar.

    em resposta a: [Dúvida] MPLS-VRF+BGP+OSPF #103310
    dayvidson
    Participante

    @Leandro Freitas

    nos CEs tem rota default para o PE1, deve estar faltando algum cabelo de sapo hehehe estou catando aqui no google para ver o que é.

    em resposta a: [Dúvida] MPLS-VRF+BGP+OSPF #103307
    dayvidson
    Participante

    @Leandro Freitas

    rotas adicionadas e propagadas pelo bgp conforme mostrada abaixo;

    PE1#show ip route vrf vpna

    Routing Table: vpna

    Codes: C – connected, S – static, R – RIP, M – mobile, B – BGP

           D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area

           N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2

           E1 – OSPF external type 1, E2 – OSPF external type 2

           i – IS-IS, su – IS-IS summary, L1 – IS-IS level-1, L2 – IS-IS level-2

           ia – IS-IS inter area, * – candidate default, U – per-user static route

           o – ODR, P – periodic downloaded static route

    Gateway of last resort is not set

         200.1.0.0/32 is subnetted, 1 subnets

    S       200.1.0.1 is directly connected, Serial1/0

         200.2.0.0/32 is subnetted, 1 subnets

    B       200.2.0.1 [200/0] via 172.2.0.1, 00:18:21

         150.1.0.0/30 is subnetted, 2 subnets

    B       150.1.2.0 [200/0] via 172.2.0.1, 00:10:36

    C       150.1.1.0 is directly connected, Serial1/0


    PE2#show ip route vrf vpna

    Routing Table: vpna

    Codes: C – connected, S – static, R – RIP, M – mobile, B – BGP

           D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area

           N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2

           E1 – OSPF external type 1, E2 – OSPF external type 2

           i – IS-IS, su – IS-IS summary, L1 – IS-IS level-1, L2 – IS-IS level-2

           ia – IS-IS inter area, * – candidate default, U – per-user static route

           o – ODR, P – periodic downloaded static route

    Gateway of last resort is not set

         200.1.0.0/32 is subnetted, 1 subnets

    B       200.1.0.1 [200/0] via 172.1.0.1, 00:08:17

         200.2.0.0/32 is subnetted, 1 subnets

    S       200.2.0.1 is directly connected, Serial1/0

         150.1.0.0/30 is subnetted, 2 subnets

    C       150.1.2.0 is directly connected, Serial1/0

    B       150.1.1.0 [200/0] via 172.1.0.1, 00:12:03


    Mesmo assim nada de ping entre os CE11 e CE21.

    @Jayme

    estou dando uma pesquisada sobre o VRF-Lite para ver o que está faltando nas configurações aqui..

    em resposta a: [Dúvida] MPLS-VRF+BGP+OSPF #103304
    dayvidson
    Participante

    @Leandro Freitas

     

    PE1#show mpls ldp neighbor

        Peer LDP Ident: 172.10.0.1:0; Local LDP Ident 172.1.0.1:0

            TCP connection: 172.10.0.1.16647 – 172.1.0.1.646

            State: Oper; Msgs sent/rcvd: 52/52; Downstream

            Up time: 00:34:39

            LDP discovery sources:

              Serial1/2, Src IP addr: 192.168.0.14

            Addresses bound to peer LDP Ident:

              192.168.0.14    172.10.0.1      192.168.0.22    192.168.0.29

        Peer LDP Ident: 172.20.0.1:0; Local LDP Ident 172.1.0.1:0

            TCP connection: 172.20.0.1.43822 – 172.1.0.1.646

            State: Oper; Msgs sent/rcvd: 49/50; Downstream

            Up time: 00:34:04

            LDP discovery sources:

              Serial1/3, Src IP addr: 192.168.0.18

            Addresses bound to peer LDP Ident:

              192.168.0.18    172.20.0.1      192.168.0.26    192.168.0.30


    Estou com uma dúvida quanto a tabela de roteamento da vrf vpna, não era para constar a rede do outro clinet da vrf vpna ? a meu ver era para ela vim por bgp já que ele propaga rota estática??

    PE1#show ip route vrf vpna

    Routing Table: vpna

    Codes: C – connected, S – static, R – RIP, M – mobile, B – BGP

           D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area

           N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2

           E1 – OSPF external type 1, E2 – OSPF external type 2

           i – IS-IS, su – IS-IS summary, L1 – IS-IS level-1, L2 – IS-IS level-2

           ia – IS-IS inter area, * – candidate default, U – per-user static route

           o – ODR, P – periodic downloaded static route

    Gateway of last resort is not set

         200.1.0.0/32 is subnetted, 1 subnets

    S       200.1.0.1 is directly connected, Serial1/0

         150.1.0.0/30 is subnetted, 1 subnets

    C       150.1.1.0 is directly connected, Serial1/0

     

    em resposta a: [Dúvida] MPLS-VRF+BGP+OSPF #103300
    dayvidson
    Participante

    @Leandro Freitas

     

    Todos os router do Backbone se comunicam sejam pelo ip da serial ou pelo das loopback. O ospf está montando a tabela de vizinhaça  e os loopback está sendo aprendidos conforme segue abaixo.

    PE1#show ip route

    Codes: C – connected, S – static, R – RIP, M – mobile, B – BGP

           D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area

           N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2

           E1 – OSPF external type 1, E2 – OSPF external type 2

           i – IS-IS, su – IS-IS summary, L1 – IS-IS level-1, L2 – IS-IS level-2

           ia – IS-IS inter area, * – candidate default, U – per-user static route

           o – ODR, P – periodic downloaded static route

    Gateway of last resort is not set

         172.1.0.0/32 is subnetted, 1 subnets

    C       172.1.0.1 is directly connected, Loopback0

         172.2.0.0/32 is subnetted, 1 subnets

    O       172.2.0.1 [110/129] via 192.168.0.18, 00:05:06, Serial1/3

                      [110/129] via 192.168.0.14, 00:05:06, Serial1/2

         172.10.0.0/32 is subnetted, 1 subnets

    O       172.10.0.1 [110/65] via 192.168.0.14, 00:05:06, Serial1/2

         172.20.0.0/32 is subnetted, 1 subnets

    O       172.20.0.1 [110/65] via 192.168.0.18, 00:05:06, Serial1/3

         192.168.0.0/30 is subnetted, 5 subnets

    C       192.168.0.12 is directly connected, Serial1/2

    O       192.168.0.24 [110/128] via 192.168.0.18, 00:05:06, Serial1/3

    O       192.168.0.28 [110/128] via 192.168.0.18, 00:05:06, Serial1/3

     


    PE1#show ip ospf neighbor

    Neighbor ID     Pri   State           Dead Time   Address         Interface

    172.20.0.1        0   FULL/  –        00:00:37    192.168.0.18    Serial1/3

    172.10.0.1        0   FULL/  –        00:00:38    192.168.0.14    Serial1/2


    PE1#show ip bgp summary

    BGP router identifier 172.1.0.1, local AS number 1

    BGP table version is 1, main routing table version 1

    Neighbor        V    AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd

    172.2.0.1       4     1      10      10        1    0    0 00:06:44        0


    PE1#show ip bgp vpnv4 all neighbors

    BGP neighbor is 172.2.0.1,  remote AS 1, internal link

      BGP version 4, remote router ID 172.2.0.1

      BGP state = Established, up for 00:07:02

      Last read 00:00:02, last write 00:00:02, hold time is 180, keepalive interval i

      Neighbor capabilities:

        Route refresh: advertised and received(old & new)

        Address family IPv4 Unicast: advertised and received

        Address family VPNv4 Unicast: advertised and received

      Message statistics:

        InQ depth is 0

        OutQ depth is 0

                             Sent       Rcvd

        Opens:                  1          1

        Notifications:          0          0

        Updates:                0          0

        Keepalives:            10         10

        Route Refresh:          0          0

        Total:                 11         11

      Default minimum time between advertisement runs is 0 seconds

     For address family: IPv4 Unicast

      BGP table version 1, neighbor version 1/0

     Output queue size : 0

      Index 1, Offset 0, Mask 0x2

      1 update-group member

                                     Sent       Rcvd

      Prefix activity:               —-       —-

        Prefixes Current:               0          0

        Prefixes Total:                 0          0

        Implicit Withdraw:              0          0

        Explicit Withdraw:              0          0

        Used as bestpath:             n/a          0

        Used as multipath:            n/a          0

                                       Outbound    Inbound

      Local Policy Denied Prefixes:   


       


        Total:                                0          0

      Number of NLRIs in the update sent: max 0, min 0

     For address family: VPNv4 Unicast

      BGP table version 1, neighbor version 1/0

     Output queue size : 0

      Index 1, Offset 0, Mask 0x2

      1 update-group member

                                     Sent       Rcvd

      Prefix activity:               —-       —-

        Prefixes Current:               0          0

        Prefixes Total:                 0          0

        Implicit Withdraw:              0          0

        Explicit Withdraw:              0          0

        Used as bestpath:             n/a          0

        Used as multipath:            n/a          0

                                       Outbound    Inbound

      Local Policy Denied Prefixes:   


       


        Total:                                0          0

      Number of NLRIs in the update sent: max 0, min 0

      Connections established 1; dropped 0

      Last reset never

    Connection state is ESTAB, I/O status: 1, unread input bytes: 0

    Connection is ECN Disabled

    Local host: 172.1.0.1, Local port: 31936

    Foreign host: 172.2.0.1, Foreign port: 179

    Enqueued packets for retransmit: 0, input: 0  mis-ordered: 0 (0 bytes)

    Event Timers (current time is 0xA96D14):

    Timer          Starts    Wakeups            Next

    Retrans            10          0             0x0

    TimeWait            0          0             0x0

    AckHold             9          8             0x0

    SendWnd             0          0             0x0

    KeepAlive           0          0             0x0

    GiveUp              0          0             0x0

    PmtuAger            0          0             0x0

    DeadWait            0          0             0x0

    iss: 4241964247  snduna: 4241964491  sndnxt: 4241964491     sndwnd:  16141

    irs:  621084766  rcvnxt:  621085010  rcvwnd:      16141  delrcvwnd:    243

    SRTT: 221 ms, RTTO: 832 ms, RTV: 611 ms, KRTT: 0 ms

    minRTT: 32 ms, maxRTT: 300 ms, ACK hold: 200 ms

    Flags: active open, nagle

    IP Precedence value : 6

    Datagrams (max data segment is 536 bytes):

    Rcvd: 10 (out of order: 0), with data: 9, total data bytes: 243

    Sent: 20 (retransmit: 0, fastretransmit: 0, partialack: 0, Second Congestion: 0), with data: 10, total data bytes: 243


    como segue no ínicio do post o show runnin do PE1 com uma rota estática de vrf o bgp não era para propagar ela ?

    em resposta a: Foco Certificação Cisco + Linux ? #95857
    dayvidson
    Participante

    rgentil,

    hehe antes de postar dei uma lida no post dele.

    em resposta a: Foco Certificação Cisco + Linux ? #95855
    dayvidson
    Participante

    Flyner,

    Obrigado, o CBT eu já tenho vou atras do Net Academy.

    em resposta a: Foco Certificação Cisco + Linux ? #95853
    dayvidson
    Participante

    Flyner,

    essa é minha ideia, porque antes de me inscrever na pós eu comprei os 2 livros da ICND deve estar chegando segunda-feira e estou revisando alguns assuntos linux e fazendo alguns labs e pretendo tirar ccna e lpi CCNP só quando terminar a pós porque ai já vou ter visto todo assunto que cobre.

    em resposta a: Foco Certificação Cisco + Linux ? #95851
    dayvidson
    Participante

    atualmente estou trabalhando como adminsitrador de redes Linux e Windows. e vou começar a pós como falei para entrar na área CISCO o que eu quero é manter os estudos CISCO + Linux isso em certificação porque trabalho com windows mais não sou certificado.

Visualizando 14 posts - 1 até 14 (de 14 do total)